Product Center

Product Center

Product Center

Product Display

Classification

product details

Product Details

Product Details

Surge protector FS-SPD-220V/380V

FSSPD surge protector (SPD) is suitable for TN-S, TN-C-S, TT, IT and other power supply systems with AC frequency of 50/60Hz, 385V/380V and below. It can be used as an equipotential connection at the interface between LPZ1, LPZ2, and LPZ3. Its design basis complies with IEC61643-1 and GB18802.1, and the shell design is installed on a 35mm electrical guide rail. This product has a built-in failure release device. When the surge protector fails due to overcurrent overheating and breakdown, the failure release device can automatically disconnect it from the power grid. At the same time, the visual alarm indicates green (normal) and red (fault), and the module can be replaced under working voltage.
  • Detailed introduction

Product features

 

◆ Built in overcurrent overheating and temperature controlled circuit breaker technology.
The module design and installation are convenient, and can be replaced online.
◆ Low leakage current, fast response time, and low residual voltage.
◆ Alarm indicator device, green (normal), red (faulty).
◆ New technology production, high energy, gap discharge electrode (N-PE).

 

Main parameters and technical performance

 

Model specifications: FSSPD-S12.5/S15/S25/S50, FSSPD-E20/E40/E60/E80/E100
Power grid operating voltage Un (v): 220/380
Maximum operating voltage Uc (V): 385
Voltage protection level Up (V): ≤ 1.5~2.5
Maximum discharge current lmax (KA): 12.5~100KA
Nominal discharge current in (KA): 12.5~80KA
Response time TA (ns):<25,<100
Suggested connection wire diameter (mm2) for L/N: 10.16, 16.16, 16.25, 25.35
PE recommended connection wire diameter (mm2): 25, 35
Selection of fuses or circuit breakers (A): 16~125

Surge protector FS-SPD-220V/380V

FSSPD surge protector (SPD) is suitable for TN-S, TN-C-S, TT, IT and other power supply systems with AC frequency of 50/60Hz, 385V/380V and below. It can be used as an equipotential connection at the interface between LPZ1, LPZ2, and LPZ3. Its design basis complies with IEC61643-1 and GB18802.1, and the shell design is installed on a 35mm electrical guide rail. This product has a built-in failure release device. When the surge protector fails due to overcurrent overheating and breakdown, the failure release device can automatically disconnect it from the power grid. At the same time, the visual alarm indicates green (normal) and red (fault), and the module can be replaced under working voltage.
  • 详细介绍

Product features

 

◆ Built in overcurrent overheating and temperature controlled circuit breaker technology.
The module design and installation are convenient, and can be replaced online.
◆ Low leakage current, fast response time, and low residual voltage.
◆ Alarm indicator device, green (normal), red (faulty).
◆ New technology production, high energy, gap discharge electrode (N-PE).

 

Main parameters and technical performance

 

Model specifications: FSSPD-S12.5/S15/S25/S50, FSSPD-E20/E40/E60/E80/E100
Power grid operating voltage Un (v): 220/380
Maximum operating voltage Uc (V): 385
Voltage protection level Up (V): ≤ 1.5~2.5
Maximum discharge current lmax (KA): 12.5~100KA
Nominal discharge current in (KA): 12.5~80KA
Response time TA (ns):<25,<100
Suggested connection wire diameter (mm2) for L/N: 10.16, 16.16, 16.25, 25.35
PE recommended connection wire diameter (mm2): 25, 35
Selection of fuses or circuit breakers (A): 16~125

Surge protector FS-SPD-220V/380V

FSSPD surge protector (SPD) is suitable for TN-S, TN-C-S, TT, IT and other power supply systems with AC frequency of 50/60Hz, 385V/380V and below. It can be used as an equipotential connection at the interface between LPZ1, LPZ2, and LPZ3. Its design basis complies with IEC61643-1 and GB18802.1, and the shell design is installed on a 35mm electrical guide rail. This product has a built-in failure release device. When the surge protector fails due to overcurrent overheating and breakdown, the failure release device can automatically disconnect it from the power grid. At the same time, the visual alarm indicates green (normal) and red (fault), and the module can be replaced under working voltage.
  • Detailed introduction

Product features

 

◆ Built in overcurrent overheating and temperature controlled circuit breaker technology.
The module design and installation are convenient, and can be replaced online.
◆ Low leakage current, fast response time, and low residual voltage.
◆ Alarm indicator device, green (normal), red (faulty).
◆ New technology production, high energy, gap discharge electrode (N-PE).

 

Main parameters and technical performance

 

Model specifications: FSSPD-S12.5/S15/S25/S50, FSSPD-E20/E40/E60/E80/E100
Power grid operating voltage Un (v): 220/380
Maximum operating voltage Uc (V): 385
Voltage protection level Up (V): ≤ 1.5~2.5
Maximum discharge current lmax (KA): 12.5~100KA
Nominal discharge current in (KA): 12.5~80KA
Response time TA (ns):<25,<100
Suggested connection wire diameter (mm2) for L/N: 10.16, 16.16, 16.25, 25.35
PE recommended connection wire diameter (mm2): 25, 35
Selection of fuses or circuit breakers (A): 16~125

Fisco Electric (Shenzhen) Co., Ltd

Contact phone number: 400-990-0152
Address: No. 8 Shenlian Road, Henggang Street, Longgang District, Shenzhen, Guangdong Province
Service philosophy: Service with dedication, quality first, and customer satisfaction.

Fisco Electric (Shenzhen) Co., Ltd

Contact phone number: 400-990-0152
Address: No. 8 Shenlian Road, Henggang Street, Longgang District, Shenzhen, Guangdong Province
Service philosophy: Service with dedication, quality first, and customer satisfaction.

Technical support: NetTrade Media Technology

Copyright ©  Copyright 2024 Fisco Electric (Shenzhen) Co., Ltd

Fisco Electric (Shenzhen) Co., Ltd

Service hotline: 400-990-0152
Company address: No. 8 Shenlian Road, Henggang Street, Longgang District, Shenzhen, Guangdong Province
Service philosophy: Service with dedication, quality first, and customer satisfaction.

Technical support: Online Trade Media Technology Record No.: Zhejiang ICP Bei 2020035851

Copyright ©  Copyright 2024 Fisco Electric (Shenzhen) Co., Ltd

Copyright © 2024 Fishman Electric (Shenzhen) Co., Ltd

备案号:粤ICP备2024305252号-1