Main model specifications
Model specifications：FSFK-Δ-400V-45A、FSFK-Δ-400V-63A、FSFK-Δ-400V-80A、FSFK-Y-250V-45A、FSFK-Y-250V-63A、FSFK-Y-250V-80A
Control capacitor capacity：≤20kVar(共补0.45KV)、≤30kVar(共补0.45KV)、≤40kVar (共补0.45KV)、≤10kVar(分补0.25KV)、≤20kVar(分补0.25KV)、≤30kVar (分补0.25KV)
Product features
◆ Voltage zero crossing input, current zero crossing cut-off, no surge current, no overvoltage generated.
Low power consumption and no generation of harmonics.
◆ Input signal is isolated from switch photoelectric, with high EMc protection measures and strong anti-interference ability.
◆ It can be directly used in conjunction with our company's dynamic reactive power compensation controller.
The switch operation status has functions of opening and closing, and power indication.
Working conditions
The altitude shall not exceed 2500m.
◆ Environmental temperature: -25 ℃~+50 ℃.
The air humidity should not exceed 50% at 40 ℃ and 90% at 20 ℃.
◆ There are no corrosive gases, conductive dust, or flammable or explosive media present around.
There is no severe vibration at the installation site.
Main parameters and technical performance
◆ Rated working voltage: 380VAC ± 20% ◆ Contact voltage drop:<100mV ◆ Boundary dimensions: 160mm * 96mm * 90mm
◆ Control voltage: DC8.18V ◆ Response time:<1000m ◆ Interval between each turn on and turn off:>1 second
◆ Working power supply: 380V ◆ Conduction impedance:<0.003Q ◆ Insulation level:>10M under normal atmospheric conditions
◆ Voltage distortion rate:<5% ◆ Circuit power consumption: ≤ 1.5VA ◆ Fixed size: 80mm * 142mm
◆ Service life: 100000 times ◆ Contact voltage resistance:>1600V ◆ Rated frequency: 50Hz ± 0.5
◆ Control capacity: (three-phase~30kvar: △ type connection) (single-phase ≤ 10kvar: Y-type connection)
◆ Interval between two consecutive connections:>1 second (note: for switch stability and lifespan, it is recommended that the interval between each connection should not be less than 30 seconds)
Main model specifications
Model specifications：FSFK-Δ-400V-45A、FSFK-Δ-400V-63A、FSFK-Δ-400V-80A、FSFK-Y-250V-45A、FSFK-Y-250V-63A、FSFK-Y-250V-80A
Control capacitor capacity：≤20kVar(共补0.45KV)、≤30kVar(共补0.45KV)、≤40kVar (共补0.45KV)、≤10kVar(分补0.25KV)、≤20kVar(分补0.25KV)、≤30kVar (分补0.25KV)
Product features
◆ Voltage zero crossing input, current zero crossing cut-off, no surge current, no overvoltage generated.
Low power consumption and no generation of harmonics.
◆ Input signal is isolated from switch photoelectric, with high EMc protection measures and strong anti-interference ability.
◆ It can be directly used in conjunction with our company's dynamic reactive power compensation controller.
The switch operation status has functions of opening and closing, and power indication.
Working conditions
The altitude shall not exceed 2500m.
◆ Environmental temperature: -25 ℃~+50 ℃.
The air humidity should not exceed 50% at 40 ℃ and 90% at 20 ℃.
◆ There are no corrosive gases, conductive dust, or flammable or explosive media present around.
There is no severe vibration at the installation site.
Main parameters and technical performance
◆ Rated working voltage: 380VAC ± 20% ◆ Contact voltage drop:<100mV ◆ Boundary dimensions: 160mm * 96mm * 90mm
◆ Control voltage: DC8.18V ◆ Response time:<1000m ◆ Interval between each turn on and turn off:>1 second
◆ Working power supply: 380V ◆ Conduction impedance:<0.003Q ◆ Insulation level:>10M under normal atmospheric conditions
◆ Voltage distortion rate:<5% ◆ Circuit power consumption: ≤ 1.5VA ◆ Fixed size: 80mm * 142mm
◆ Service life: 100000 times ◆ Contact voltage resistance:>1600V ◆ Rated frequency: 50Hz ± 0.5
◆ Control capacity: (three-phase~30kvar: △ type connection) (single-phase ≤ 10kvar: Y-type connection)
◆ Interval between two consecutive connections:>1 second (note: for switch stability and lifespan, it is recommended that the interval between each connection should not be less than 30 seconds)
Main model specifications
Model specifications：FSFK-Δ-400V-45A、FSFK-Δ-400V-63A、FSFK-Δ-400V-80A、FSFK-Y-250V-45A、FSFK-Y-250V-63A、FSFK-Y-250V-80A
Control capacitor capacity：≤20kVar(共补0.45KV)、≤30kVar(共补0.45KV)、≤40kVar (共补0.45KV)、≤10kVar(分补0.25KV)、≤20kVar(分补0.25KV)、≤30kVar (分补0.25KV)
Product features
◆ Voltage zero crossing input, current zero crossing cut-off, no surge current, no overvoltage generated.
Low power consumption and no generation of harmonics.
◆ Input signal is isolated from switch photoelectric, with high EMc protection measures and strong anti-interference ability.
◆ It can be directly used in conjunction with our company's dynamic reactive power compensation controller.
The switch operation status has functions of opening and closing, and power indication.
Working conditions
The altitude shall not exceed 2500m.
◆ Environmental temperature: -25 ℃~+50 ℃.
The air humidity should not exceed 50% at 40 ℃ and 90% at 20 ℃.
◆ There are no corrosive gases, conductive dust, or flammable or explosive media present around.
There is no severe vibration at the installation site.
Main parameters and technical performance
◆ Rated working voltage: 380VAC ± 20% ◆ Contact voltage drop:<100mV ◆ Boundary dimensions: 160mm * 96mm * 90mm
◆ Control voltage: DC8.18V ◆ Response time:<1000m ◆ Interval between each turn on and turn off:>1 second
◆ Working power supply: 380V ◆ Conduction impedance:<0.003Q ◆ Insulation level:>10M under normal atmospheric conditions
◆ Voltage distortion rate:<5% ◆ Circuit power consumption: ≤ 1.5VA ◆ Fixed size: 80mm * 142mm
◆ Service life: 100000 times ◆ Contact voltage resistance:>1600V ◆ Rated frequency: 50Hz ± 0.5
◆ Control capacity: (three-phase~30kvar: △ type connection) (single-phase ≤ 10kvar: Y-type connection)
◆ Interval between two consecutive connections:>1 second (note: for switch stability and lifespan, it is recommended that the interval between each connection should not be less than 30 seconds)
