Product features
◆ Small size, light weight, and convenient installation
Using high-quality metallized polypropylene film as the medium and unique structural design, the volume and weight of the capacitor are only 1/4 and 1/5 of the old product. Low loss, low heat generation, and low temperature rise
By adopting a new type of gold spraying process and a unique metalized film edge thickening technology, the capacitor's anti surge ability is greatly enhanced, its performance is stable, its working life is greatly extended, and the capacitor's own consumption is reduced
The threshold is less than 0.08%, with less heat generation and low temperature rise, and excellent energy-saving effect.
◆ Safe and reliable
Excellent self-healing performance: Local breakdown of the medium can quickly self heal, restore normal operation, and greatly improve reliability; The safety is equipped with self discharge resistors and safety devices, ensuring safe and reliable use.
◆ No oil leakage, green and environmentally friendly
Using microcrystalline wax as impregnating agent, it is in a solid state at room temperature, with a melting point higher than 70 ℃. During use, it does not leak oil, avoiding environmental pollution. It not only has a dry structure, but also has impregnation properties
The advantages of containers. In addition, the unique impregnation process makes the operation of capacitors more reliable.
◆ Corrosion resistant and anti-counterfeiting shell
The beautiful and sturdy printed iron shell has undergone special double anti-corrosion treatment, greatly improving its corrosion resistance. The unique anti-counterfeiting design is exquisite and beautiful.
Main parameters and technical performance
Rated voltage: 230V, 250400450525
Rated capacity: 1-50kvar for 0.4-0.69KV, capacity for other voltage levels to be determined separately
Rated frequency: 50Hz or 60Hz
Capacity tolerance: -5%~+10%
Loss tangent value: -5%~+10%
Voltage withstand: 2 to 15 times the rated voltage between poles for 2 seconds, 2Un+2kV or 3kV between pole shells, whichever is higher, for 10 seconds, without permanent breakdown or flashover
Maximum allowable overvoltage: When 1.1 times the rated voltage, it shall not exceed 8 hours per 24 hours; When the rated voltage is 1.15 times, the duration should not exceed 30 minutes every 24 hours;
When the rated voltage is 1.2 times, it shall not exceed 5 minutes per 24/J/hour; At 1.3 times the rated voltage, not exceeding 1 minute per 24/J/hour
Maximum allowable current: It is allowed to operate at a current not exceeding 1.3 times the rated current. Transition overcurrent, taking into account the effects of overvoltage, positive deviation of capacitance, and harmonics, shall not exceed a maximum of 1.43 times the rated current
Connection methods: △ angle connection, Y star connection, ★ star connection with neutral point lead out,... Three section type, single-phase type, and other connection methods are agreed upon according to user needs
Self discharge performance: After the capacitor is powered off, the remaining voltage drops from 2Un to below 50V within 3 minutes
Compliant with standard: GB/T12747-2004IEC60831-1996
Main model specifications
Main models and specifications Product models: 0.45-3-3, 0.45-5-3, 0.45-6-3, 0.45-8-3, 0.45-10-3, 0.45-12-3, 0.45-14-3, 0.45-14-3, 0.45-15-3, 0.45-16-3, 0.45-18-3, 0.45-20-3, 0.45-24-3, 0.45-25-25, 0.45-30-3, 0.45-35-3, 0.45-40-3, 0.45-50-3
Rated voltage (KV): 0.45
Rated capacity (Kvar): 3-50
Rated capacitance (uF): 47.2~786.3
Rated current (A): 3.8~64.2
Height H (mm): 115~230
Output terminals: M6/M8/M10
Installation precautions
Installation and maintenance must be carried out by qualified personnel;
Before operation, the power supply of the equipment must be cut off;
After disconnection, maintain the interval between the next input time for at least 3 minutes. Before touching the capacitor, use an insulated wire to discharge the two poles of the capacitor;
A gap of at least 30mm should be maintained between capacitors, and sufficient ventilation space should be reserved inside the capacitor cabinet, which needs to be installed in a well ventilated area.
Product features
◆ Small size, light weight, and convenient installation
Using high-quality metallized polypropylene film as the medium and unique structural design, the volume and weight of the capacitor are only 1/4 and 1/5 of the old product. Low loss, low heat generation, and low temperature rise
By adopting a new type of gold spraying process and a unique metalized film edge thickening technology, the capacitor's anti surge ability is greatly enhanced, its performance is stable, its working life is greatly extended, and the capacitor's own consumption is reduced
The threshold is less than 0.08%, with less heat generation and low temperature rise, and excellent energy-saving effect.
◆ Safe and reliable
Excellent self-healing performance: Local breakdown of the medium can quickly self heal, restore normal operation, and greatly improve reliability; The safety is equipped with self discharge resistors and safety devices, ensuring safe and reliable use.
◆ No oil leakage, green and environmentally friendly
Using microcrystalline wax as impregnating agent, it is in a solid state at room temperature, with a melting point higher than 70 ℃. During use, it does not leak oil, avoiding environmental pollution. It not only has a dry structure, but also has impregnation properties
The advantages of containers. In addition, the unique impregnation process makes the operation of capacitors more reliable.
◆ Corrosion resistant and anti-counterfeiting shell
The beautiful and sturdy printed iron shell has undergone special double anti-corrosion treatment, greatly improving its corrosion resistance. The unique anti-counterfeiting design is exquisite and beautiful.
Main parameters and technical performance
Rated voltage: 230V, 250400450525
Rated capacity: 1-50kvar for 0.4-0.69KV, capacity for other voltage levels to be determined separately
Rated frequency: 50Hz or 60Hz
Capacity tolerance: -5%~+10%
Loss tangent value: -5%~+10%
Voltage withstand: 2 to 15 times the rated voltage between poles for 2 seconds, 2Un+2kV or 3kV between pole shells, whichever is higher, for 10 seconds, without permanent breakdown or flashover
Maximum allowable overvoltage: When 1.1 times the rated voltage, it shall not exceed 8 hours per 24 hours; When the rated voltage is 1.15 times, the duration should not exceed 30 minutes every 24 hours;
When the rated voltage is 1.2 times, it shall not exceed 5 minutes per 24/J/hour; At 1.3 times the rated voltage, not exceeding 1 minute per 24/J/hour
Maximum allowable current: It is allowed to operate at a current not exceeding 1.3 times the rated current. Transition overcurrent, taking into account the effects of overvoltage, positive deviation of capacitance, and harmonics, shall not exceed a maximum of 1.43 times the rated current
Connection methods: △ angle connection, Y star connection, ★ star connection with neutral point lead out,... Three section type, single-phase type, and other connection methods are agreed upon according to user needs
Self discharge performance: After the capacitor is powered off, the remaining voltage drops from 2Un to below 50V within 3 minutes
Compliant with standard: GB/T12747-2004IEC60831-1996
Main model specifications
Main models and specifications Product models: 0.45-3-3, 0.45-5-3, 0.45-6-3, 0.45-8-3, 0.45-10-3, 0.45-12-3, 0.45-14-3, 0.45-14-3, 0.45-15-3, 0.45-16-3, 0.45-18-3, 0.45-20-3, 0.45-24-3, 0.45-25-25, 0.45-30-3, 0.45-35-3, 0.45-40-3, 0.45-50-3
Rated voltage (KV): 0.45
Rated capacity (Kvar): 3-50
Rated capacitance (uF): 47.2~786.3
Rated current (A): 3.8~64.2
Height H (mm): 115~230
Output terminals: M6/M8/M10
Installation precautions
Installation and maintenance must be carried out by qualified personnel;
Before operation, the power supply of the equipment must be cut off;
After disconnection, maintain the interval between the next input time for at least 3 minutes. Before touching the capacitor, use an insulated wire to discharge the two poles of the capacitor;
A gap of at least 30mm should be maintained between capacitors, and sufficient ventilation space should be reserved inside the capacitor cabinet, which needs to be installed in a well ventilated area.
Product features
◆ Small size, light weight, and convenient installation
Using high-quality metallized polypropylene film as the medium and unique structural design, the volume and weight of the capacitor are only 1/4 and 1/5 of the old product. Low loss, low heat generation, and low temperature rise
By adopting a new type of gold spraying process and a unique metalized film edge thickening technology, the capacitor's anti surge ability is greatly enhanced, its performance is stable, its working life is greatly extended, and the capacitor's own consumption is reduced
The threshold is less than 0.08%, with less heat generation and low temperature rise, and excellent energy-saving effect.
◆ Safe and reliable
Excellent self-healing performance: Local breakdown of the medium can quickly self heal, restore normal operation, and greatly improve reliability; The safety is equipped with self discharge resistors and safety devices, ensuring safe and reliable use.
◆ No oil leakage, green and environmentally friendly
Using microcrystalline wax as impregnating agent, it is in a solid state at room temperature, with a melting point higher than 70 ℃. During use, it does not leak oil, avoiding environmental pollution. It not only has a dry structure, but also has impregnation properties
The advantages of containers. In addition, the unique impregnation process makes the operation of capacitors more reliable.
◆ Corrosion resistant and anti-counterfeiting shell
The beautiful and sturdy printed iron shell has undergone special double anti-corrosion treatment, greatly improving its corrosion resistance. The unique anti-counterfeiting design is exquisite and beautiful.
Main parameters and technical performance
Rated voltage: 230V, 250400450525
Rated capacity: 1-50kvar for 0.4-0.69KV, capacity for other voltage levels to be determined separately
Rated frequency: 50Hz or 60Hz
Capacity tolerance: -5%~+10%
Loss tangent value: -5%~+10%
Voltage withstand: 2 to 15 times the rated voltage between poles for 2 seconds, 2Un+2kV or 3kV between pole shells, whichever is higher, for 10 seconds, without permanent breakdown or flashover
Maximum allowable overvoltage: When 1.1 times the rated voltage, it shall not exceed 8 hours per 24 hours; When the rated voltage is 1.15 times, the duration should not exceed 30 minutes every 24 hours;
When the rated voltage is 1.2 times, it shall not exceed 5 minutes per 24/J/hour; At 1.3 times the rated voltage, not exceeding 1 minute per 24/J/hour
Maximum allowable current: It is allowed to operate at a current not exceeding 1.3 times the rated current. Transition overcurrent, taking into account the effects of overvoltage, positive deviation of capacitance, and harmonics, shall not exceed a maximum of 1.43 times the rated current
Connection methods: △ angle connection, Y star connection, ★ star connection with neutral point lead out,... Three section type, single-phase type, and other connection methods are agreed upon according to user needs
Self discharge performance: After the capacitor is powered off, the remaining voltage drops from 2Un to below 50V within 3 minutes
Compliant with standard: GB/T12747-2004IEC60831-1996
Main model specifications
Main models and specifications Product models: 0.45-3-3, 0.45-5-3, 0.45-6-3, 0.45-8-3, 0.45-10-3, 0.45-12-3, 0.45-14-3, 0.45-14-3, 0.45-15-3, 0.45-16-3, 0.45-18-3, 0.45-20-3, 0.45-24-3, 0.45-25-25, 0.45-30-3, 0.45-35-3, 0.45-40-3, 0.45-50-3
Rated voltage (KV): 0.45
Rated capacity (Kvar): 3-50
Rated capacitance (uF): 47.2~786.3
Rated current (A): 3.8~64.2
Height H (mm): 115~230
Output terminals: M6/M8/M10
Installation precautions
Installation and maintenance must be carried out by qualified personnel;
Before operation, the power supply of the equipment must be cut off;
After disconnection, maintain the interval between the next input time for at least 3 minutes. Before touching the capacitor, use an insulated wire to discharge the two poles of the capacitor;
A gap of at least 30mm should be maintained between capacitors, and sufficient ventilation space should be reserved inside the capacitor cabinet, which needs to be installed in a well ventilated area.
